To perform the test you will need a fresh urine sample , this should be cooled to room temperature (approx 20 minutes is adequate) and a watch or timer.
When the urine sample is ready remove the cassette & pippette from the pouch
Place the cassette on a clean level surface
Using the pippette, add 3 drops of urine to into the sample hole. Allow 5 second between each drop.
Read the result at 5 minutes
How to interpret the results:
Negative: Two colored lines appear adjacent to each other in the result window. This indicates that no drug above the cut-off level has been detected. The test line intensity may be any shade of pink and weaker or stronger than that of the control line. All five tests are independent of each other, it is not recommended to compare the results or color intensity of the test lines.
Positive: Only one colored line appears in the control region (C). No test line appears in the test region (T).
Invalid: If no control line appears in the result window, the test should be considered void. Improper testing procedures or deterioration of reagents probably occurred.
Important do not attempt to read the result after 10 minutes from adding the sample.The result showing at 5 minutes is the accurate reading for the test performed.